<?XML Version="1.0">
<nidocument>
<nicomment>
<nifamily familyname="LabVIEW DSC" displayname="LabVIEW DSC">
</nifamily>
</nicomment>
<nierror code="-2147483638">
LabVIEW DSC:  (Hex 0x8000000A) The data necessary to complete this operation is not yet available.
</nierror>
<nierror code="-2147467263">
LabVIEW DSC:  (Hex 0x80004001) Not implemented.
</nierror>
<nierror code="-2147467262">
LabVIEW DSC:  (Hex 0x80004002) No such interface supported.
</nierror>
<nierror code="-2147467261">
LabVIEW DSC:  (Hex 0x80004003) Invalid pointer.
</nierror>
<nierror code="-2147467260">
LabVIEW DSC:  (Hex 0x80004004) Operation aborted.
</nierror>
<nierror code="-2147467259">
LabVIEW DSC:  (Hex 0x80004005) Unspecified error.
</nierror>
<nierror code="-2147418113">
LabVIEW DSC:  (Hex 0x8000FFFF) Catastrophic failure.
</nierror>
<nierror code="-2147286928">
LabVIEW DSC:  (Hex 0x80030070) Disk is full.
</nierror>
<nierror code="-2147024891">
LabVIEW DSC:  (Hex 0x80070005) Access denied.
</nierror>
<nierror code="-2147024890">
LabVIEW DSC:  (Hex 0x80070006) Invalid handle.
</nierror>
<nierror code="-2147024882">
LabVIEW DSC:  (Hex 0x8007000E) Ran out of memory.
</nierror>
<nierror code="-2147024809">
LabVIEW DSC:  (Hex 0x80070057) One or more arguments are invalid.
</nierror>
<nierror code="-1967390719">
LabVIEW DSC:  (Hex 0x8ABC0001) Packet is too short or too long.
</nierror>
<nierror code="-1967390717">
LabVIEW DSC:  (Hex 0x8ABC0003) Command not allowed in this particular context.
</nierror>
<nierror code="-1967390716">
LabVIEW DSC:  (Hex 0x8ABC0004) Duplicate item already exists.
</nierror>
<nierror code="-1967390715">
LabVIEW DSC:  (Hex 0x8ABC0005) Item not found.
</nierror>
<nierror code="-1967390714">
LabVIEW DSC:  (Hex 0x8ABC0006) Interface object not valid.
</nierror>
<nierror code="-1967390713">
LabVIEW DSC:  (Hex 0x8ABC0007) Target of Modify() already has an input connection.
</nierror>
<nierror code="-1967390712">
LabVIEW DSC:  (Hex 0x8ABC0008) Unable to resolve name to a network address.
</nierror>
<nierror code="-1967390711">
LabVIEW DSC:  (Hex 0x8ABC0009) Network operation timed out.
</nierror>
<nierror code="-1967390704">
LabVIEW DSC:  (Hex 0x8ABC0010) Socket has been disconnected by its peer.
</nierror>
<nierror code="-1967390703">
LabVIEW DSC:  (Hex 0x8ABC0011) Service could not be resolved to a port address.
</nierror>
<nierror code="-1967390702">
LabVIEW DSC:  (Hex 0x8ABC0012) Socket timed out while trying to connect to peer.
</nierror>
<nierror code="-1967390701">
LabVIEW DSC:  (Hex 0x8ABC0013) Socket startup (WSAStartup) failed.
</nierror>
<nierror code="-1967390699">
LabVIEW DSC:  (Hex 0x8ABC0015) The specified time is invalid.
</nierror>
<nierror code="-1967390698">
LabVIEW DSC:  (Hex 0x8ABC0016) SetInfo was not able to rename the trace due to a conflict.
</nierror>
<nierror code="-1967390697">
LabVIEW DSC:  (Hex 0x8ABC0017) FindOptimum did not find a matching point.
</nierror>
<nierror code="-1967390696">
LabVIEW DSC:  (Hex 0x8ABC0018) A writer already exists for this trace.
</nierror>
<nierror code="-1967390695">
LabVIEW DSC:  (Hex 0x8ABC0019) Network area not specified.
</nierror>
<nierror code="-1967390694">
LabVIEW DSC:  (Hex 0x8ABC001A) Cache overflow.
</nierror>
<nierror code="-1967390693">
LabVIEW DSC:  (Hex 0x8ABC001B) There are no more data points to return from this query.
</nierror>
<nierror code="-1967390692">
LabVIEW DSC:  (Hex 0x8ABC001C) Data retrieved from the network is incorrect.
</nierror>
<nierror code="-1967390691">
LabVIEW DSC:  (Hex 0x8ABC001D) Failed to call LogosTraceStartup before accessing traces.
</nierror>
<nierror code="-1967390690">
LabVIEW DSC:  (Hex 0x8ABC001E) Already subscribed to the database trace.
</nierror>
<nierror code="-1967390689">
LabVIEW DSC:  (Hex 0x8ABC001F) Attempted to log to a buffer that is full.
</nierror>
<nierror code="-1967390688">
LabVIEW DSC:  (Hex 0x8ABC0020) An attempt was made to write to a database to which the user has no write access.
</nierror>
<nierror code="-1967390687">
LabVIEW DSC:  (Hex 0x8ABC0021) The URL is to short to contain the minimum amount of information or the pointer is invalid.
</nierror>
<nierror code="-1967390686">
LabVIEW DSC:  (Hex 0x8ABC0022) Machine name is not present in the URL.
</nierror>
<nierror code="-1967390685">
LabVIEW DSC:  (Hex 0x8ABC0023) Machine name starts with a non-alphabetic character.
</nierror>
<nierror code="-1967390684">
LabVIEW DSC:  (Hex 0x8ABC0024) Machine name contains an invalid character.
</nierror>
<nierror code="-1967390683">
LabVIEW DSC:  (Hex 0x8ABC0025) Process name is not present in the URL.
</nierror>
<nierror code="-1967390682">
LabVIEW DSC:  (Hex 0x8ABC0026) Process name contains an invalid character.
</nierror>
<nierror code="-1967390681">
LabVIEW DSC:  (Hex 0x8ABC0027) Point or tag name is not present in the URL.
</nierror>
<nierror code="-1967390680">
LabVIEW DSC:  (Hex 0x8ABC0028) Point or tag name contains an invalid character.
</nierror>
<nierror code="-1967390679">
LabVIEW DSC:  (Hex 0x8ABC0029) URL is not properly formatted: not enough '\' characters at the beginning.
</nierror>
<nierror code="-1967390672">
LabVIEW DSC:  (Hex 0x8ABC0030) Empty component in point or tag name.
</nierror>
<nierror code="-1967390671">
LabVIEW DSC:  (Hex 0x8ABC0031) Invalid update rate.
</nierror>
<nierror code="-1967390670">
LabVIEW DSC:  (Hex 0x8ABC0032) Invalid deadband.
</nierror>
<nierror code="-1967390669">
LabVIEW DSC:  (Hex 0x8ABC0033) Key conflict for map collection on insert.
</nierror>
<nierror code="-1967390668">
LabVIEW DSC:  (Hex 0x8ABC0034) Thread initiation failed.
</nierror>
<nierror code="-1967390667">
LabVIEW DSC:  (Hex 0x8ABC0035) Process manager server is down.
</nierror>
<nierror code="-1967390666">
LabVIEW DSC:  (Hex 0x8ABC0036) Time stamp at RealTimeTQ not ready.
</nierror>
<nierror code="-1967390655">
LabVIEW DSC:  (Hex 0x8ABC0041) Object environment server has already shut down.
</nierror>
<nierror code="-1967390638">
LabVIEW DSC:  (Hex 0x8ABC0052) Item not found.
</nierror>
<nierror code="-1967390623">
LabVIEW DSC:  (Hex 0x8ABC0061) Attempted to resolve an incomplete URL.
</nierror>
<nierror code="-1967390622">
LabVIEW DSC:  (Hex 0x8ABC0062) Attempted to resolve an unrecognized URL type.
</nierror>
<nierror code="-1967390621">
LabVIEW DSC:  (Hex 0x8ABC0063) Process server has already shut down.
</nierror>
<nierror code="-1967390620">
LabVIEW DSC:  (Hex 0x8ABC0064) Access request denied.
</nierror>
<nierror code="-1967390607">
LabVIEW DSC:  (Hex 0x8ABC0071) Attempted to active an alarm while it was disabled.
</nierror>
<nierror code="-1967390591">
LabVIEW DSC:  (Hex 0x8ABC0081) Unable to resolve the host name.
</nierror>
<nierror code="-1967390590">
LabVIEW DSC:  (Hex 0x8ABC0082) Unable to resolve the IP address returned from gethostbyname().
</nierror>
<nierror code="-1967390575">
LabVIEW DSC:  (Hex 0x8ABC0091) Unrecognized attribute name.
</nierror>
<nierror code="-1967390574">
LabVIEW DSC:  (Hex 0x8ABC0092) Invalid attribute value.
</nierror>
<nierror code="-1967390573">
LabVIEW DSC:  (Hex 0x8ABC0093) Failed to get or set attribute.
</nierror>
<nierror code="-1967390558">
LabVIEW DSC:  (Hex 0x8ABC00A2) Invalid user account name.
</nierror>
<nierror code="-1967390557">
LabVIEW DSC:  (Hex 0x8ABC00A3) Invalid password.
</nierror>
<nierror code="-1967390556">
LabVIEW DSC:  (Hex 0x8ABC00A4) Invalid group name.
</nierror>
<nierror code="-1967390555">
LabVIEW DSC:  (Hex 0x8ABC00A5) Security domain not found.
</nierror>
<nierror code="-1967390554">
LabVIEW DSC:  (Hex 0x8ABC00A6) User account not found.
</nierror>
<nierror code="-1967390553">
LabVIEW DSC:  (Hex 0x8ABC00A7) User group not found.
</nierror>
<nierror code="-1967390552">
LabVIEW DSC:  (Hex 0x8ABC00A8) Domain not found.
</nierror>
<nierror code="-1967390551">
LabVIEW DSC:  (Hex 0x8ABC00A9) Not enough disk space.
</nierror>
<nierror code="-1967390550">
LabVIEW DSC:  (Hex 0x8ABC00AA) Error reading security data.
</nierror>
<nierror code="-1967390549">
LabVIEW DSC:  (Hex 0x8ABC00AB) Error writing security data.
</nierror>
<nierror code="-1967390548">
LabVIEW DSC:  (Hex 0x8ABC00AC) Invalid security code.
</nierror>
<nierror code="-1967390547">
LabVIEW DSC:  (Hex 0x8ABC00AD) Duplicate user account name.
</nierror>
<nierror code="-1967390546">
LabVIEW DSC:  (Hex 0x8ABC00AE) Duplicate group name.
</nierror>
<nierror code="-1967390545">
LabVIEW DSC:  (Hex 0x8ABC00AF) Security data file not found.
</nierror>
<nierror code="-1967390544">
LabVIEW DSC:  (Hex 0x8ABC00B0) Cannot delete built-in user account.
</nierror>
<nierror code="-1967390543">
LabVIEW DSC:  (Hex 0x8ABC00B1) Cannot delete built-in group.
</nierror>
<nierror code="-1967390542">
LabVIEW DSC:  (Hex 0x8ABC00B2) User account disabled.
</nierror>
<nierror code="-1967390541">
LabVIEW DSC:  (Hex 0x8ABC00B3) Password has expired.
</nierror>
<nierror code="-1967390540">
LabVIEW DSC:  (Hex 0x8ABC00B4) New password cannot match old password.
</nierror>
<nierror code="-1967390464">
LabVIEW DSC:  (Hex 0x8ABC0100) URL does not start with two slashes.
</nierror>
<nierror code="-1967390463">
LabVIEW DSC:  (Hex 0x8ABC0101) URL starts with more than two slashes.
</nierror>
<nierror code="-1967390462">
LabVIEW DSC:  (Hex 0x8ABC0102) URL contains two consecutive delimiters.
</nierror>
<nierror code="-1967390461">
LabVIEW DSC:  (Hex 0x8ABC0103) URL contains a bad machine name.
</nierror>
<nierror code="-1967390460">
LabVIEW DSC:  (Hex 0x8ABC0104) Unbalanced quotes in URL.
</nierror>
<nierror code="-1967390432">
LabVIEW DSC:  (Hex 0x8ABC0120) Asynchronous text queries not supported.
</nierror>
<nierror code="-1967390368">
LabVIEW DSC:  (Hex 0x8ABC0160) Database could not be opened.
</nierror>
<nierror code="-1967390367">
LabVIEW DSC:  (Hex 0x8ABC0161) Archive database same as current database.
</nierror>
<nierror code="-1967390366">
LabVIEW DSC:  (Hex 0x8ABC0162) Unable to delete database while in use by another application.
</nierror>
<nierror code="-1967390365">
LabVIEW DSC:  (Hex 0x8ABC0163) Failed to move traces.
</nierror>
<nierror code="-1967390364">
LabVIEW DSC:  (Hex 0x8ABC0164) Failed to retrieve trace statistics from the database.
</nierror>
<nierror code="-1967390352">
LabVIEW DSC:  (Hex 0x8ABC0170) Database path is invalid.
</nierror>
<nierror code="-1967374336">
LabVIEW DSC:  (Hex 0x8ABC4000) Security system not initialized.
</nierror>
<nierror code="-1967374335">
LabVIEW DSC:  (Hex 0x8ABC4001) Maximum simultaneous session count exceeded.
</nierror>
<nierror code="-1967374334">
LabVIEW DSC:  (Hex 0x8ABC4002) Invalid user token.
</nierror>
<nierror code="-1967374333">
LabVIEW DSC:  (Hex 0x8ABC4003) Invalid user type.
</nierror>
<nierror code="-1967353856">
LabVIEW DSC:  (Hex 0x8ABC9000) Invalid occurrence value.
</nierror>
<nierror code="-1967353855">
LabVIEW DSC:  (Hex 0x8ABC9001) Database configuration is not valid.
</nierror>
<nierror code="-1967353854">
LabVIEW DSC:  (Hex 0x8ABC9002) Unable to match tag names from database.
</nierror>
<nierror code="-1967353853">
LabVIEW DSC:  (Hex 0x8ABC9003) Invalid database version.
</nierror>
<nierror code="-180121626">
LabVIEW DSC:  (Hex 0xF5438FE6) Buffer underflowed.
</nierror>
<nierror code="-7999">
LabVIEW DSC:  Function not implemented or available.
</nierror>
<nierror code="-7998">
LabVIEW DSC:  Could not allocate queue for log thread.
</nierror>
<nierror code="-7997">
LabVIEW DSC:  Could not allocate buffer for thread info.
</nierror>
<nierror code="-7995">
LabVIEW DSC:  Tried to get tag info with empty tag list.
</nierror>
<nierror code="-7994">
LabVIEW DSC:  Tried to fill tag list, but the tag list is not empty.
</nierror>
<nierror code="-7993">
LabVIEW DSC:  Tried to put info into non-empty list.
</nierror>
<nierror code="-7992">
LabVIEW DSC:  Forced to terminate a worker thread.
</nierror>
<nierror code="-7991">
LabVIEW DSC:  Attempted to spawn undefined worker thread.
</nierror>
<nierror code="-7988">
LabVIEW DSC:  Invalid data event handle.
</nierror>
<nierror code="-7987">
LabVIEW DSC:  Logging thread already started.
</nierror>
<nierror code="-7986">
LabVIEW DSC:  Logging thread not started.
</nierror>
<nierror code="-7985">
LabVIEW DSC:  No threads have been opened for logging.
</nierror>
<nierror code="-7979">
LabVIEW DSC:  Time stamp of first data point not available.
</nierror>
<nierror code="-7978">
LabVIEW DSC:  Time stamp of last data point not available.
</nierror>
<nierror code="-7977">
LabVIEW DSC:  Data type not available.
</nierror>
<nierror code="-7976">
LabVIEW DSC:  Failed to get Citadel historical database version.
</nierror>
<nierror code="-7975">
LabVIEW DSC:  Database not open.
</nierror>
<nierror code="-7974">
LabVIEW DSC:  Threaded database exception, details unknown.
</nierror>
<nierror code="-7973">
LabVIEW DSC:  Bad OTDB structure.
</nierror>
<nierror code="-7972">
LabVIEW DSC:  Cannot find or create path for threaded database file.
</nierror>
<nierror code="-7971">
LabVIEW DSC:  Cannot find or create threaded database file.
</nierror>
<nierror code="-7970">
LabVIEW DSC:  Cannot read threaded database file.
</nierror>
<nierror code="-7969">
LabVIEW DSC:  Cannot flush the database.
</nierror>
<nierror code="-7968">
LabVIEW DSC:  Bad threaded database handle.
</nierror>
<nierror code="-7967">
LabVIEW DSC:  Incorrect Citadel historical database version.
</nierror>
<nierror code="-7966">
LabVIEW DSC:  Cannot write threaded database file.
</nierror>
<nierror code="-7965">
LabVIEW DSC:  Cannot get TDBMutex within timeout.
</nierror>
<nierror code="-7964">
LabVIEW DSC:  Cannot talk to the RPC server.
</nierror>
<nierror code="-7963">
LabVIEW DSC:  Different database path already open.
</nierror>
<nierror code="-7962">
LabVIEW DSC:  Invalid parameter(s) for FlushThreadDatabase.
</nierror>
<nierror code="-7961">
LabVIEW DSC:  Database already opened in read-write mode.
</nierror>
<nierror code="-7960">
LabVIEW DSC:  Database must be opened in read-write mode.
</nierror>
<nierror code="-7959">
LabVIEW DSC:  <Not A Path> is invalid for historical logging.
</nierror>
<nierror code="-7958">
LabVIEW DSC:  "Relative" path is invalid for historical logging.
</nierror>
<nierror code="-7957">
LabVIEW DSC:  "Empty Path" is invalid for historical logging.
</nierror>
<nierror code="-7956">
LabVIEW DSC:  Specified historical database directory is a file.
</nierror>
<nierror code="-7955">
LabVIEW DSC:  Historical database directory does not exist.
</nierror>
<nierror code="-7954">
LabVIEW DSC:  Tried to search Citadel database beyond beginning of data.
</nierror>
<nierror code="-7953">
LabVIEW DSC:  Tried to search Citadel database past end of data.
</nierror>
<nierror code="-7950">
LabVIEW DSC:  Thread exception; details unknown.
</nierror>
<nierror code="-7949">
LabVIEW DSC:  Bad OTHREAD structure.
</nierror>
<nierror code="-7948">
LabVIEW DSC:  Cannot find or create database thread.
</nierror>
<nierror code="-7947">
LabVIEW DSC:  Cannot read database thread.
</nierror>
<nierror code="-7946">
LabVIEW DSC:  Cannot write database thread.
</nierror>
<nierror code="-7945">
LabVIEW DSC:  Bad database thread handle.
</nierror>
<nierror code="-7944">
LabVIEW DSC:  Database thread Name not found.
</nierror>
<nierror code="-7943">
LabVIEW DSC:  Failed to log the database entry.
</nierror>
<nierror code="-7942">
LabVIEW DSC:  Empty thread name sent to OpenThread.
</nierror>
<nierror code="-7941">
LabVIEW DSC:  Undefined data type.
</nierror>
<nierror code="-7940">
LabVIEW DSC:  Invalid enumeration handle.
</nierror>
<nierror code="-7935">
LabVIEW DSC:  Thread file exception; details unknown.
</nierror>
<nierror code="-7934">
LabVIEW DSC:  Cannot find or create thread file.
</nierror>
<nierror code="-7933">
LabVIEW DSC:  Cannot read thread file.
</nierror>
<nierror code="-7932">
LabVIEW DSC:  Cannot write thread file.
</nierror>
<nierror code="-7931">
LabVIEW DSC:  Versions are incompatible.
</nierror>
<nierror code="-7925">
LabVIEW DSC:  Thread query exception; details unknown.
</nierror>
<nierror code="-7924">
LabVIEW DSC:  Bad OTHREAD structure.
</nierror>
<nierror code="-7923">
LabVIEW DSC:  Buffer size is less than page size.
</nierror>
<nierror code="-7922">
LabVIEW DSC:  Bad thread query handle.
</nierror>
<nierror code="-7912">
LabVIEW DSC:  Empty list of tags sent to Read Historical Trends.vi.
</nierror>
<nierror code="-7911">
LabVIEW DSC:  Invalid trend size (0).
</nierror>
<nierror code="-7910">
LabVIEW DSC:  Sample Interval must be greater than or equal to 0.00.
</nierror>
<nierror code="-7900">
LabVIEW DSC:  Logging queue overflowed.
</nierror>
<nierror code="-7899">
LabVIEW DSC:  Unable to allocate memory.
</nierror>
<nierror code="-7898">
LabVIEW DSC:  Unable to free block of memory.
</nierror>
<nierror code="-7897">
LabVIEW DSC:  Unable to lock block of memory.
</nierror>
<nierror code="-7896">
LabVIEW DSC:  Unable to unlock block of memory.
</nierror>
<nierror code="-7895">
LabVIEW DSC:  CreateThread failed.
</nierror>
<nierror code="-7894">
LabVIEW DSC:  CreateEvent failed.
</nierror>
<nierror code="-7893">
LabVIEW DSC:  Unable to close handle.
</nierror>
<nierror code="-7892">
LabVIEW DSC:  Unable to retrieve thread exit code.
</nierror>
<nierror code="-7891">
LabVIEW DSC:  Unable to set event.
</nierror>
<nierror code="-7890">
LabVIEW DSC:  Unable to terminate thread.
</nierror>
<nierror code="-7889">
LabVIEW DSC:  Unable to get current thread ID.
</nierror>
<nierror code="-7888">
LabVIEW DSC:  Unable to set Windows Hook.
</nierror>
<nierror code="-7887">
LabVIEW DSC:  Unable to unhook Windows Hook.
</nierror>
<nierror code="-7563">
LabVIEW DSC:  Access denied when attempting to connect to another Tag Engine.
</nierror>
<nierror code="-7203">
LabVIEW DSC:  Unsupported server type.
</nierror>
<nierror code="-7202">
LabVIEW DSC:  Invalid server name.
</nierror>
<nierror code="-7201">
LabVIEW DSC:  Queue has overflowed.
</nierror>
<nierror code="-7113">
LabVIEW DSC:  Group name is not defined.
</nierror>
<nierror code="-7112">
LabVIEW DSC:  Incorrect tag access rights.
</nierror>
<nierror code="-7111">
LabVIEW DSC:  No tags in memory.
</nierror>
<nierror code="-7110">
LabVIEW DSC:  Incorrect tag dataype.
</nierror>
<nierror code="-7109">
LabVIEW DSC:  Tag has bad alarm limit.
</nierror>
<nierror code="-7108">
LabVIEW DSC:  Tag Engine is not running.
</nierror>
<nierror code="-7107">
LabVIEW DSC:  No tags configured for printing.
</nierror>
<nierror code="-7106">
LabVIEW DSC:  No tags configured for historical data logging.
</nierror>
<nierror code="-7105">
LabVIEW DSC:  No tags configured for event logging.
</nierror>
<nierror code="-7104">
LabVIEW DSC:  Invalid printer port configured for printing.
</nierror>
<nierror code="-7103">
LabVIEW DSC:  Invalid path to directory configured for historical data logging.
</nierror>
<nierror code="-7102">
LabVIEW DSC:  Invalid path to directory configured for event logging.
</nierror>
<nierror code="-7101">
LabVIEW DSC:  The tag name specified is not defined.
</nierror>
<nierror code="180092949">
LabVIEW DSC:  (Hex 0xABC0015) Item not found but subscription succeeded.
</nierror>
<nierror code="180093009">
LabVIEW DSC:  (Hex 0xABC0051) Item not found, but subscription succeeded.
</nierror>
<nierror code="180129793">
LabVIEW DSC:  (Hex 0xABC9001) Subscription requested
</nierror>
<nierror code="180129794">
LabVIEW DSC:  (Hex 0xABC9002) Unable to match all tag names.
</nierror>
</nidocument>